Cross Cut Tester ชุดทดสอบการยึดเกาะสี
฿4,500.000
Package Included:
- Brush
- Blade (1x1mm 11 teeth, 1x2mm 11 teeth, )
- Cross Hatch Cutter
- Magnifier
- Carry box
- roll 3M transparent tape
- Manual (ภาษาไทย)
follow standards : BS3900 E6, BS/EN ISO 2409, ASTM D3359, GB/T9286
ราคาดังกล่าวยังไม่รวมVat
ค่าบริการจัดส่ง 200 บาท
คำอธิบาย
specification
1. Blade spacing is: 1+ 0.01mm, 2+ 0.01mm.
2. Cutting blade addendum straight color: ≯ 0.003mm ≯ 0.006mm.
3. Cutting blade working tooth width: ≯ 0.05mm.
advice
1. Samples must be prepared according to ISOR1514 and ISO2828 requirements.
2. The test piece placed on the tablet hardness is sufficient.
3. Hand-held hatch handle, so multi-blade cutter perpendicular to specimen plane.
4. With uniform pressure, steady approach, no shaking and 20-50mm/S cutting speed cutting program
5.The example is rotated 90 degrees on the cutting stroke, repeat the above operations, to form a graphic mesh.
6 soft bristles on both sides of the diagonal lattice pattern gently back 5 times,
5 times forward brushing the sample.
7. Testing at least three different locations on the test piece is completed. If testing at three different locations, the experiment should be repeated at more than three locations while recording the results. Replace multiple blades, use a blade screwdriver. Loosen the two screws, insert the knife, the knife blade sticks to the handle site and tighten the screws.
รีวิว
ยังไม่มีบทวิจารณ์